I. Overview
Xcmg wheel loader is a commonly used heavy-duty mechanical equipment used for excavation, loading, site leveling and other tasks. In order to extend the service life of the equipment and improve the working efficiency of the loader, maintenance work is crucial. This article will introduce the main contents of XCMG wheel loader maintenance.
2. Daily maintenance
1. Cleaning of air filter for xcmg loader
The loader air filter is an important protective device when the loader is working. It can effectively prevent dust and other impurities from entering the engine and avoid engine damage. Therefore, the air filter should be disassembled and cleaned regularly, or replaced with a clean filter element.
2. Tire inflation and inspection of xcmg Z50GN
Loader tire inflation must meet specified standards. Under-inflation or over-inflation will affect the ground contact area, traction and thrust resistance, thereby affecting the use of the loader. In addition to regular inflation, you should also check the tires for cracks, foreign objects, etc., and repair or replace them in time.
3. Regular maintenance
1.Replacement of engine and hydraulic oil
The loader's engine and hydraulic oil need to be replaced regularly, usually around 1,000 hours, or once a year. When replacing, you need to drain the oil first, clean the oil circuit, then add new engine oil or hydraulic oil, and clear the filter.
2. Maintenance of oil seals and bearings
The loader's oil seals and bearings are critical components and require regular maintenance. Maintenance methods include checking whether the amount of lubricating oil is sufficient, removing dust and debris on the oil seal, and checking and replacing the bearings in time.
4. Lubrication
All parts and joints of the loader require lubrication to reduce wear and friction. Lubrication work should be carried out in strict accordance with the requirements to ensure the life of wear-resistant parts and the stability of mechanical properties.
5. Cleaning
Loader cleaning is an important part of maintenance. Cleaning should be classified according to different parts and functions of the machine. When cleaning, be careful not to spray water on the machine or get it stained with chemical solutions such as gasoline or lubricating oil to avoid damage.
6. Precautions
During loader maintenance, you need to pay attention to the following points:
1. Before operation, the loader needs to be inspected to determine whether the equipment is in good working condition.
2. Avoid overloading the loader during operation to avoid damage to the loader.
3. Do not change the lubricating oil, engine oil brand and model of the loader at will to avoid damaging the equipment.
4. When the loader is not used for a long time, it needs to be stored in a dry and cool place.
For more information, you can maintenance based on followings:
860118456 | Air Filter | Change every 250 hours or every month(whichever comes first) |
860113256 | Air Filter | Change every 500 hours or every 2 monthes(whichever comes first) |
860111665 | Engine Oil Filter | First change interval:after 250 hours,from the second time:every 500 hours |
860113253 | Fuel Filter | Change every 250 hours or every month(whichever comes first) |
860118457 | Fuel Filter | Change every 500 hours or every 2 monthes(whichever comes first) |
860113254 | Fuel Filter | Change every 250 hours or every month(whichever comes first) |
250200144 | Torquer Converter Filter | Planetary gearbox,First change interval:after 100 hours From the second time:every 1000 hours |
860116239 | Torquer Converter Filter | ZF gearbox,180 gearbox,First change interval:after 100 hours.From the second time:every 1000 hours |
252302835 | Torquer Converter Filter | gearbox,First change interval:after 100 hours.From the second time：every 1000 hours |
803164217 | Filling Filter for Hydraulic oil Tank | Change every 1000 hours or half a year (whichever comes first) |
803164230 | Filling Filter for Hydraulic oil Tank(with lock,optional) | Change every 1000 hours or half a year (whichever comes first) |
803164329 | Oil Sucking Filter for Hydraulic oil | Change every 1000 hours or half a year (whichever comes first) |
803164216 | Oil Returning Filter for Hydraulic oil | Change every 1000 hours or half a year (whichever comes first) |
803164217 | Fuel filling filter | Change every 1000 hours or half a year (whichever comes first) |
803164230 | Fuel filling filter(with lock,optional) | Change every 1000 hours or half a year (whichever comes first) |
If you need spare parts for XCMG machines, we have genuine parts available.
