GR1003 motor grader
Product Introduction
The GR1003 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Technical Parameters
Item | Unit | Parameter |
Engine Model | WP4.1 | |
Rated power/speed | kW/rpm | 75/2200 |
Forward velocity | km/h | 5/8/11/17/24/38 |
Reverse speed | km/h | 5/11/24 |
Tractive effort f=0.75 | kN | ≥39 |
Minimum turning radius | m | 6 |
Length X chord height | mm | 3048*450 |
Overall dimension | mm | 7130*2375*3150 |
Total weight | kg | 7500 |
Product Advantage
1. The front of the cab is placed in the front frame, with a good field of view, which is conducive to observing the state of both ends of the shovel blade when turning and smoothing the corners, easy to manipulate and improve the working accuracy.
2, rugged road conditions shovel height change amount is small, the front wheel can swing around, the rear wheel by the balance box swing before and after, the road condition is not normal, by the tire swing offset or reduce the height of the shovel knife change, high accuracy.
3. Lift cylinder spacing is large, blade edge change is small, more suitable for fine work.
4. Rotary device for external gear structure, no soil, high accuracy;
5, double cylinder drive, shovel knife belt load rotation, high efficiency.
GR1003 motor grader
Product Introduction
The GR1003 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Technical Parameters
Item | Unit | Parameter |
Engine Model | WP4.1 | |
Rated power/speed | kW/rpm | 75/2200 |
Forward velocity | km/h | 5/8/11/17/24/38 |
Reverse speed | km/h | 5/11/24 |
Tractive effort f=0.75 | kN | ≥39 |
Minimum turning radius | m | 6 |
Length X chord height | mm | 3048*450 |
Overall dimension | mm | 7130*2375*3150 |
Total weight | kg | 7500 |
Product Advantage
1. The front of the cab is placed in the front frame, with a good field of view, which is conducive to observing the state of both ends of the shovel blade when turning and smoothing the corners, easy to manipulate and improve the working accuracy.
2, rugged road conditions shovel height change amount is small, the front wheel can swing around, the rear wheel by the balance box swing before and after, the road condition is not normal, by the tire swing offset or reduce the height of the shovel knife change, high accuracy.
3. Lift cylinder spacing is large, blade edge change is small, more suitable for fine work.
4. Rotary device for external gear structure, no soil, high accuracy;
5, double cylinder drive, shovel knife belt load rotation, high efficiency.