QAY160 truck crane
Product Introduction
XCMG QAY160 crane fully integrates advanced design and manufacturing technologies from home and abroad, and multiple proprietary core technologies have obtained national patents. Large equipment such as blast furnaces and coke ovens are increasingly becoming larger, and similar large lifting machinery is needed for installation and maintenance of these large equipment. The QAY160 all terrain crane adopts a six axle all terrain chassis, automatic control mechanical gearbox, oil and gas suspension, full head cab, and fully covered walking platform. Elliptical section six section telescopic main arm, two folding side mounted auxiliary arms, single cylinder front support variable amplitude, high position at the tail of the turntable, downward hanging movable combination counterweight, independent engine for upper carriage, concealed double independent winch, and external meshing rotary mechanism. Two level double H-shaped legs, 360 ° full rotation operation. Total power variable system, pilot electro-hydraulic proportional control technology. Large lifting capacity, strong driving force, good performance, wide applicability, and reliable use.
Specification
Weight | ||
Dead weight in travel state | kg | 70000kg |
1st axle load | kg | 11500kg |
2nd axle load | kg | 11500kg |
3rd axle load | kg | 11700kg |
4th axle load | kg | 11700kg |
5th axle load | kg | 11800kg |
6th axle load | kg | 11800kg |
Power | ||
Superstructure engine | TAD720VE | |
Superstructure engine rated output | kW/(r/min) | 162/2100kw/(r/min) |
Carrier engine | OM502LA. Ⅲ/3 | |
Carrier engine rated output | kW/(r/min) | 390/1800kw/(r/min) |
Carrier engine max output | N.m/(r/min) | 2400/1080N.m/(r/min) |
Travel | ||
Max. travel speed | km/h | 70km/h |
Min. turning diameter | m | 24m |
Superstructure engine max output | N.m/(r/min) | 854/1400 N.m/(r/min) |
Approach angle | ° | |
Departure angle | ° | |
Max. grade ability | % | 48% |
Fuel consumption for 100km | L | 80L |
Lifting performance | ||
Max. lifting capacity | t | 160t |
Min. rated working radius | m | 3m |
Turning radius at turntable tail | mm | 4850mm |
Parameters Max. load | kN.m | 5282 kN.m |
Full- extended boom Max. load | kN.m | 2140 kN.m |
Full- extended boom Lifting height | m | 56.3m |
Full-extended boom+ jib Lifting height | m | 79m |
Parameters Boom length | m | 13.8m |
Full-extended boom Boom length | m | 60m |
Working speed | ||
Boom elevating time | s | 90s |
Boom full telescoping time | s | 550s |
Max. swing speed | r/min | 1.9 r/min |
Main winch max. speed | m/min | |
Auxiliary winch max. speed | m/min |
QAY160 truck crane
Product Introduction
XCMG QAY160 crane fully integrates advanced design and manufacturing technologies from home and abroad, and multiple proprietary core technologies have obtained national patents. Large equipment such as blast furnaces and coke ovens are increasingly becoming larger, and similar large lifting machinery is needed for installation and maintenance of these large equipment. The QAY160 all terrain crane adopts a six axle all terrain chassis, automatic control mechanical gearbox, oil and gas suspension, full head cab, and fully covered walking platform. Elliptical section six section telescopic main arm, two folding side mounted auxiliary arms, single cylinder front support variable amplitude, high position at the tail of the turntable, downward hanging movable combination counterweight, independent engine for upper carriage, concealed double independent winch, and external meshing rotary mechanism. Two level double H-shaped legs, 360 ° full rotation operation. Total power variable system, pilot electro-hydraulic proportional control technology. Large lifting capacity, strong driving force, good performance, wide applicability, and reliable use.
Specification
Weight | ||
Dead weight in travel state | kg | 70000kg |
1st axle load | kg | 11500kg |
2nd axle load | kg | 11500kg |
3rd axle load | kg | 11700kg |
4th axle load | kg | 11700kg |
5th axle load | kg | 11800kg |
6th axle load | kg | 11800kg |
Power | ||
Superstructure engine | TAD720VE | |
Superstructure engine rated output | kW/(r/min) | 162/2100kw/(r/min) |
Carrier engine | OM502LA. Ⅲ/3 | |
Carrier engine rated output | kW/(r/min) | 390/1800kw/(r/min) |
Carrier engine max output | N.m/(r/min) | 2400/1080N.m/(r/min) |
Travel | ||
Max. travel speed | km/h | 70km/h |
Min. turning diameter | m | 24m |
Superstructure engine max output | N.m/(r/min) | 854/1400 N.m/(r/min) |
Approach angle | ° | |
Departure angle | ° | |
Max. grade ability | % | 48% |
Fuel consumption for 100km | L | 80L |
Lifting performance | ||
Max. lifting capacity | t | 160t |
Min. rated working radius | m | 3m |
Turning radius at turntable tail | mm | 4850mm |
Parameters Max. load | kN.m | 5282 kN.m |
Full- extended boom Max. load | kN.m | 2140 kN.m |
Full- extended boom Lifting height | m | 56.3m |
Full-extended boom+ jib Lifting height | m | 79m |
Parameters Boom length | m | 13.8m |
Full-extended boom Boom length | m | 60m |
Working speed | ||
Boom elevating time | s | 90s |
Boom full telescoping time | s | 550s |
Max. swing speed | r/min | 1.9 r/min |
Main winch max. speed | m/min | |
Auxiliary winch max. speed | m/min |