XCMG GR3505 Motor Grader
Product Introduction
1. Heavy duty working device
2. Load sensing hydraulic system
3. Thermal balance and flow field analysis techniques
4. Turbocharged cab technology
5. Fault Diagnosis and GPS Remote Control Technology
Technical Parameters
| Description | Unit | Parameter value | |
| Engine model | QSM11 | ||
| Rated power/speed | kW/rpm | 261/2100 | |
| Overall dimension (standard) | 11250x3180x3820 | ||
| Total weight (standard) | kg | 30000 | |
| Tire specification | 23.5R25 | ||
| Ground clearance (front axle) | mm | 500 | |
| Tread | mm | 2580 | |
| Space of front and rear axles | mm | 7200 | |
| Space of middle and rear wheels | mm | 1960 | |
| Forward velocity | km/h | 5/8/11/19/23/38 | |
| Reverse speed | km/h | 2005/11/23 | |
| Tractive effort f=0.75 | kN | 85 | |
| Maximum gradeability | % | ≥25 | |
| Tire inflation pressure | kPa | 260 | |
| Working system pressure | MPa | 20 | |
| Transmission pressure | MPa | 1.3—1.8 | |
| Maximum steering angle of front wheel | ±48° | ||
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | Front15°,Rear15° | ||
| Maximum steering angle of frame | ±27° | ||
| Minimum turning radius | m | 7.3 | |
| Scrape knife | Maximum lift height | mm | 400 |
| Maximum cutting depth | mm | 500 | |
| Maximum tilt angle | 90° | ||
| Cutting angle | 28°—70° | ||
| Angle of revolution | 360° | ||
| Length & chord height | mm | 4270x610 | |
| Coolant | L | 50 | |
| Fuel tank | L | 280 | |
| Engine | L | 24 | |
| Transmission | L | 38 | |
| Hydraulic oil | L | 110 | |
| Drive axle | L | 28 | |
| Balancing box | L | 46 | |
XCMG GR3505 Motor Grader
Product Introduction
1. Heavy duty working device
2. Load sensing hydraulic system
3. Thermal balance and flow field analysis techniques
4. Turbocharged cab technology
5. Fault Diagnosis and GPS Remote Control Technology
Technical Parameters
| Description | Unit | Parameter value | |
| Engine model | QSM11 | ||
| Rated power/speed | kW/rpm | 261/2100 | |
| Overall dimension (standard) | 11250x3180x3820 | ||
| Total weight (standard) | kg | 30000 | |
| Tire specification | 23.5R25 | ||
| Ground clearance (front axle) | mm | 500 | |
| Tread | mm | 2580 | |
| Space of front and rear axles | mm | 7200 | |
| Space of middle and rear wheels | mm | 1960 | |
| Forward velocity | km/h | 5/8/11/19/23/38 | |
| Reverse speed | km/h | 2005/11/23 | |
| Tractive effort f=0.75 | kN | 85 | |
| Maximum gradeability | % | ≥25 | |
| Tire inflation pressure | kPa | 260 | |
| Working system pressure | MPa | 20 | |
| Transmission pressure | MPa | 1.3—1.8 | |
| Maximum steering angle of front wheel | ±48° | ||
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | Front15°,Rear15° | ||
| Maximum steering angle of frame | ±27° | ||
| Minimum turning radius | m | 7.3 | |
| Scrape knife | Maximum lift height | mm | 400 |
| Maximum cutting depth | mm | 500 | |
| Maximum tilt angle | 90° | ||
| Cutting angle | 28°—70° | ||
| Angle of revolution | 360° | ||
| Length & chord height | mm | 4270x610 | |
| Coolant | L | 50 | |
| Fuel tank | L | 280 | |
| Engine | L | 24 | |
| Transmission | L | 38 | |
| Hydraulic oil | L | 110 | |
| Drive axle | L | 28 | |
| Balancing box | L | 46 | |
