LW300FN wheel loader
Product Description
The Yuchai YC6B125-T21 engine is environmentally friendly and energy-saving, with strong power, meeting the national stage II emission standards.
·A fixed shaft power shift gearbox with 4 gears forward and 2 gears backward, which has been tested for its stable performance and low failure rate, and can meet the operational requirements of different working conditions.
·Single pump diversion and load sensing steering technology, with high system efficiency, energy saving and fuel saving; The pressure measuring point is led out and a centralized pressure measuring device is used to facilitate the inspection and maintenance of the hydraulic system.
·The working device adopts an overall optimized design, with a U-shaped crossbeam that has strong lifting and digging forces; New type of bucket type, with low insertion resistance, good wear resistance, and high full bucket coefficient.
·The entire vehicle circuit adopts imported waterproof and dustproof sealing connectors, centralized fuse boxes, reliable performance, and beautiful appearance.
·The all metal molded cab has a sturdy structure, luxurious interior, seamless glass docking, a wider view, and a beautiful appearance, maintaining the new car's appearance for a long time.
XCMG Brand Introduction
Xuzhou Construction Machinery Group Co., Ltd. was established in March 1989 and was approved by the State Council as one of the 120 pilot enterprise groups in China in April 1997. It is a key national enterprise and a national 863/CIMS application demonstration pilot enterprise. In 2006, it achieved a revenue of 20.6 billion yuan and is a major engineering machinery development, manufacturing, and export enterprise in China. XCMG Group adheres to the corporate spirit of "strictness, steadfastness, progress, and innovation", and follows a diversified development strategy centered on construction machinery. It has established a technology development system with a national level technology center as the core, continuously developing new products with high added value and high technological content.
Product specifications
Rated working load | (kg) | 3000 | |
Standard bucket capacity | (m3) | 1.8 | |
Operating weight | (kg) | 10600±200 | |
Maximum designed speed | Forward I gear | (km/h) | 8 |
Forward II gear | (km/h) | 13 | |
Forward III gear | (km/h) | 24 | |
Forward IV gear | (km/h) | 40 | |
Reverse I gear | (km/h) | 10 | |
Reverse II gear | (km/h) | 30 | |
Max. traction force | (kN) | 95 | |
Maximum grade ability | (°) | 30 | |
Highest Unloading Position | Unloading angel | (°) | 45 |
Unloading height | (mm) | 2930 | |
Unloading distance | (mm) | 1010 | |
Bucket digging force | (kN) | 130 | |
Maximum digging depth | (mm) | 35 | |
Boom lifting time | (s) | 5.5 | |
Total cycling time | (s) | 10 | |
Minimum turning radius | Outside of bucket | (mm) | 6010 |
Tire center | (mm) | 5162 | |
Machine steering angle | (°) | 35±1° | |
Tire specification | 17.5-25 | ||
Tire inflation pressure | Front wheel | (MPa) | 0.39±0.01 |
Rear wheel | (MPa) | 0.33±0.01 |
LW300FN wheel loader
Product Description
The Yuchai YC6B125-T21 engine is environmentally friendly and energy-saving, with strong power, meeting the national stage II emission standards.
·A fixed shaft power shift gearbox with 4 gears forward and 2 gears backward, which has been tested for its stable performance and low failure rate, and can meet the operational requirements of different working conditions.
·Single pump diversion and load sensing steering technology, with high system efficiency, energy saving and fuel saving; The pressure measuring point is led out and a centralized pressure measuring device is used to facilitate the inspection and maintenance of the hydraulic system.
·The working device adopts an overall optimized design, with a U-shaped crossbeam that has strong lifting and digging forces; New type of bucket type, with low insertion resistance, good wear resistance, and high full bucket coefficient.
·The entire vehicle circuit adopts imported waterproof and dustproof sealing connectors, centralized fuse boxes, reliable performance, and beautiful appearance.
·The all metal molded cab has a sturdy structure, luxurious interior, seamless glass docking, a wider view, and a beautiful appearance, maintaining the new car's appearance for a long time.
XCMG Brand Introduction
Xuzhou Construction Machinery Group Co., Ltd. was established in March 1989 and was approved by the State Council as one of the 120 pilot enterprise groups in China in April 1997. It is a key national enterprise and a national 863/CIMS application demonstration pilot enterprise. In 2006, it achieved a revenue of 20.6 billion yuan and is a major engineering machinery development, manufacturing, and export enterprise in China. XCMG Group adheres to the corporate spirit of "strictness, steadfastness, progress, and innovation", and follows a diversified development strategy centered on construction machinery. It has established a technology development system with a national level technology center as the core, continuously developing new products with high added value and high technological content.
Product specifications
Rated working load | (kg) | 3000 | |
Standard bucket capacity | (m3) | 1.8 | |
Operating weight | (kg) | 10600±200 | |
Maximum designed speed | Forward I gear | (km/h) | 8 |
Forward II gear | (km/h) | 13 | |
Forward III gear | (km/h) | 24 | |
Forward IV gear | (km/h) | 40 | |
Reverse I gear | (km/h) | 10 | |
Reverse II gear | (km/h) | 30 | |
Max. traction force | (kN) | 95 | |
Maximum grade ability | (°) | 30 | |
Highest Unloading Position | Unloading angel | (°) | 45 |
Unloading height | (mm) | 2930 | |
Unloading distance | (mm) | 1010 | |
Bucket digging force | (kN) | 130 | |
Maximum digging depth | (mm) | 35 | |
Boom lifting time | (s) | 5.5 | |
Total cycling time | (s) | 10 | |
Minimum turning radius | Outside of bucket | (mm) | 6010 |
Tire center | (mm) | 5162 | |
Machine steering angle | (°) | 35±1° | |
Tire specification | 17.5-25 | ||
Tire inflation pressure | Front wheel | (MPa) | 0.39±0.01 |
Rear wheel | (MPa) | 0.33±0.01 |